Description
(Read more)The Aegis Boost SE Pod Mod by GeekVape is a Child Resistant Certified (CRC) version of the original hybrid device, offering versatility, portability, and military-grade durability. Stylish, compact, and user-friendly, the Aegis Boost SE is the perfect starter kit for new vapers to enjoy nicotine salts or freebase e-liquids, with options for both mouth to lung and direct to lung draw resistance, alongside quality features appreciated by experienced vapers.
The Aegis Boost SE device mirrors the original with an ergonomic IP67 waterproof, shockproof, and dustproof body, featuring a comfortable curved back and a stitched leather inlay panel. It houses a 1500mAh internal cell, which charges at 1.5A via micro USB. The AS chipset delivers 5 - 40W of power to atomizers within the 0.2Ω - 3.0Ω resistance range, with a fast response time of less than 0.08s. The device features a triple button interface with a responsive firing button, and a 0.42" screen clearly displaying settings. (Operating instructions are below.)
The Aegis Boost SE is a hybrid pod system with a secure clip-in connection, featuring a refillable pod and compatibility with the RDTA top (sold separately). The pod boasts a spring-loaded top fill port to prevent leaks and spills, with a 3.7mL e-liquid capacity. A rotating airflow control dial allows you to adjust the draw resistance between MTL and restrictive DTL, with the release button located on the back. The pod includes a removable whistle-shaped drip tip with a protective clip-on cover, plus a circular tapered drip tip. The Aegis Boost SE pod is compatible with B Series coils, which press-fit into the base and lock securely into place. The pod comes with a pre-installed B0.4 KA1 mesh 0.4Ω coil (25 - 35W) and a B0.6 KA1 mesh 0.6Ω coil (15 - 25W) included.
Features:
- Dimensions: 106.8mm x 27.7mm x 39.2mm
- Weight: 120g
- Battery Capacity: 1500mAh
- Resistance Range: 0.2 - 3.0Ω
- Input Voltage Range: 3 - 4.25V
- Output Wattage Range: 5 - 40W
- Output Voltage Range: 1 - 6V
- Charging Voltage: 5V
- Charging Current: 1.5A
- AS Chipset
- Rapid Firing:
Includes:
- Aegis Boost Device
- Boost SE Pod (pre-installed)
- GeekVape B0.4 Coil (25 - 35W)
- GeekVape B0.6 Coil (15 - 25W)
- Coil Tool
- Micro USB Cable
- User Manual
Instructions:
- Turn On/Off:
- Rapidly press the fire button 5 times within 2s.
- Power Adjustment:
- Press the up/down button to adjust the power in 0.5W increments.
- Hold the up/down button for 1s to enter quick adjustment in 1W increments.
- Quick adjustment stops automatically after reaching the min/max power.
- Increasing output at max power restarts at min power.
- Decreasing output at min power restarts at max power.
- Puff Settings:
- With the device unlocked, press and hold the fire button and down button to enter puff settings mode.
- Press down to clear puffs. Press up to cancel.
- Press and hold the fire button 0.8s to exit.
- Device automatically exits puff settings mode after 5s of inactivity.
- With the device unlocked, press and hold the fire button and down button to enter puff settings mode.
- Lock & Unlock:
- Press and hold the up and down buttons for 2s to lock parameter adjustments.
- While parameters locked, rapidly press the fire button 3 times within 2s to lock/unlock the fire button.
- While locked, press and hold the up and down buttons for 2s to unlock all buttons.
- Version Info Display:
- With the device turned off, press and hold the up and down buttons for 2s.
- Factory Reset:
- While version information is displayed, press the up, down, and fire buttons simultaneously.
- Screen Standby:
- The device automatically enters standby mode after 10s of inactivity, deactivating the screen.
- Prompts:
- 10s Timeout: output is over 10s
- Low Battery: voltage under 3.2V - recharge necessary
- High Temperature: device temperature over 65°C before use or over 80°C during use
- Resistance: user prompted to confirm when coil resistance change is detected
- No Atomizer: press the fire button without a coil detected
- Atomizer Short: if the coil resistance is too low, or the atomizer has short-circuited
- Locked: after locking parameter adjustments or the fire button
- Unlock: after unlocking the fire button or all buttons